I have both grey and purple or pink Mutant.But its summer,Vacation's,Yard work ect.That slows a down kit building for some during summertime.I though have taken a back burner to kit building for now and concentrating on getting my life back in order after losing my mom and my German Shepard this past Xmas.Plus spending time with my German Shepard Puppy who is a ball of fire in my house and working on my 70 Dart with 340 in it .Anton Phibes wrote:As long as this thing has held the attention of Aurora and Monster fans over the years, and then for it to finally materialize suddenly in styrene....I would've thought folks would be talking about this guy for awhile and showing off some built ups. I guess not.
What's new in the Gallery?
Check This thread
Check This thread
Metaluna Mutant in Styrene...
Moderators: tay666, Moderators
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: Metaluna Mutant in Styrene...
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- tay666
- Site Admin
- Prince of Plastic
- Posts: 17534
- Joined: December 8th, 2003, 11:20 am
- Location: Conneaut Ohio
- Contact:
Re: Metaluna Mutant in Styrene...
I think the other reason for the drop off, is because they are still available.
At first, everyone was worried they wouldn't get one. Now, months later, they are still out there for purchase.
At first, everyone was worried they wouldn't get one. Now, months later, they are still out there for purchase.
Trevor Ylisaari
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: Metaluna Mutant in Styrene...
I forgot that part aswell!tay666 wrote:I think the other reason for the drop off, is because they are still available.
At first, everyone was worried they wouldn't get one. Now, months later, they are still out there for purchase.
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
-
- Bishop of Build Ups
- Posts: 3101
- Joined: November 28th, 2007, 8:24 pm
- Location: St Charles, MO
Re: Metaluna Mutant in Styrene...
Has anyone see the light blue colored plastic Mutant? Someone on ebay is offering them (ebay # 222778428337). I've only seen the pink and gray ones. Have more of them been molded since last year?
Steve Cooke
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: Metaluna Mutant in Styrene...
I've believe that is Phil that owns the Mutant and only way your going to get that Blue is if you by the set.Scooke123 wrote:Has anyone see the light blue colored plastic Mutant? Someone on ebay is offering them (ebay # 222778428337). I've only seen the pink and gray ones. Have more of them been molded since last year?
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
-
- Bishop of Build Ups
- Posts: 3101
- Joined: November 28th, 2007, 8:24 pm
- Location: St Charles, MO
Re: Metaluna Mutant in Styrene...
I wish I didn't have the gray one already. I'd like to get the blue one too.
Steve Cooke
-
- Registered Seller
- Glue Sniffer
- Posts: 166
- Joined: October 4th, 2007, 1:36 pm
- Location: NJ
- Contact:
Re: Metaluna Mutant in Styrene...
Can you post the link? - can't find it.
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: Metaluna Mutant in Styrene...
Chuck here ya go and looks like he lowered the price a bit. https://www.ebay.com/itm/Two-2-Super-Ra ... 0011.m1850Chuck wrote:Can you post the link? - can't find it.
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- dj53
- Gone but not Forgotten
- Earl of Epoxy
- Posts: 1900
- Joined: December 13th, 2007, 12:15 pm
- Location: Calgary Alberta Canada
- Contact:
Re: Metaluna Mutant in Styrene...
That seller is Phil Ceparano and he obviously is still pumping these out...WOLFMAN66 wrote:Chuck here ya go and looks like he lowered the price a bit. https://www.ebay.com/itm/Two-2-Super-Ra ... 0011.m1850Chuck wrote:Can you post the link? - can't find it.
He was also selling those plastic Aurora Thermometers, at first I thought these
were fake but it turns out I was very wrong... totally legit check this link to an auction out
https://www.hakes.com/Auction/ItemDetai ... HERMOMETER
Denis
My Name is Denis McDougall
I collect Aurora monster models and now Monarch and Moebius as well...
....and I've turned into a Resin Head ...
I collect Aurora monster models and now Monarch and Moebius as well...
....and I've turned into a Resin Head ...
-
- Bishop of Build Ups
- Posts: 3101
- Joined: November 28th, 2007, 8:24 pm
- Location: St Charles, MO
Re: Metaluna Mutant in Styrene...
Those thermometers are pretty cool - can't pay those prices for one though. I also wonder just how many Mutants there really are. Seen 3 colors now plus 2 test shot colors.
Steve Cooke
- dj53
- Gone but not Forgotten
- Earl of Epoxy
- Posts: 1900
- Joined: December 13th, 2007, 12:15 pm
- Location: Calgary Alberta Canada
- Contact:
Re: Metaluna Mutant in Styrene...
He (Phil Ceparano) must have gotten the molds fixed because there is no end in sight...
I just got this in the mail signed by Phil Ceparano....
I couldn't resist...too much Aurora History there...
and who knows...I've asked him about the MOM Godzilla...
Denis
I just got this in the mail signed by Phil Ceparano....
I couldn't resist...too much Aurora History there...
and who knows...I've asked him about the MOM Godzilla...
Denis
My Name is Denis McDougall
I collect Aurora monster models and now Monarch and Moebius as well...
....and I've turned into a Resin Head ...
I collect Aurora monster models and now Monarch and Moebius as well...
....and I've turned into a Resin Head ...
- scuzzfink85
- Bishop of Build Ups
- Posts: 3572
- Joined: May 13th, 2008, 2:18 am
- Location: Hell Mouth L.A
Re: Metaluna Mutant in Styrene...
Sometimes the temperature is way too cold for some molders in the winter.
Nostalgia can be a bad thing, especially when you are led by it.
L.K . Marks 07.
My Kung Fu is the best..
Blind ignorance can not be solved or stopped for the problem at hand.
R.T 2021
L.K . Marks 07.
My Kung Fu is the best..
Blind ignorance can not be solved or stopped for the problem at hand.
R.T 2021
- tay666
- Site Admin
- Prince of Plastic
- Posts: 17534
- Joined: December 8th, 2003, 11:20 am
- Location: Conneaut Ohio
- Contact:
Re: Metaluna Mutant in Styrene...
I was looking around on ebay today (first time in a really long time) and ran across these in glow plastic now.
So, has anyone been keeping track of how many releases / colors there have been so far?
So, has anyone been keeping track of how many releases / colors there have been so far?
Trevor Ylisaari
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: Metaluna Mutant in Styrene...
Ya been following Phils listings,Pink,Grey,Blue and now glow.First run was Pink suppose to be limited to 114.I just wish he would do the MOTM Godzilla in styrene.tay666 wrote:I was looking around on ebay today (first time in a really long time) and ran across these in glow plastic now.
So, has anyone been keeping track of how many releases / colors there have been so far?
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- Buc Wheat
- Bishop of Build Ups
- Posts: 3505
- Joined: December 21st, 2003, 4:26 pm
- Location: Windham, CT
- Contact:
Re: Metaluna Mutant in Styrene...
yeah... I've been adding um' as they pop up!
http://www.bucwheat.com/metaluna/metaluna.htm
http://www.bucwheat.com/metaluna/metaluna.htm
-
- Bishop of Build Ups
- Posts: 3101
- Joined: November 28th, 2007, 8:24 pm
- Location: St Charles, MO
Re: Metaluna Mutant in Styrene...
There were also a few test shots in different colors - I think either 2 or 3 that were on ebay a while back. They were listed once each and never saw another. I wish I would have saved the photos now!
Steve Cooke
- Pre-Scenes 2
- Registered Seller
- Jack of all Trades
- Posts: 665
- Joined: July 5th, 2006, 7:24 pm
- Location: West Jordan, Utah
Re: Metaluna Mutant in Styrene...
I'm happy I finally got a MM in blue plastic! Yay! Never thought I'd be an owner of one of these babies! Don't need a colection of the various colors but just thrilled I was able to acquire the one I got!
I totally agree Danny! This is a MUST HAVE for sure!WOLFMAN66 wrote:I just wish he would do the MOTM Godzilla in styrene.
Steven R. Ross
AROARA Resin Model Kits
Retro Dinosaurs/Mammals of the 1970's
steveross@metrogroup.com
AROARA Resin Model Kits
Retro Dinosaurs/Mammals of the 1970's
steveross@metrogroup.com
- tay666
- Site Admin
- Prince of Plastic
- Posts: 17534
- Joined: December 8th, 2003, 11:20 am
- Location: Conneaut Ohio
- Contact:
Re: Metaluna Mutant in Styrene...
I'm still waiting for the price to come down a bit more.
I see they are now listed for $50, which is a lot cheaper than the original price.
But still more than I am willing to pay for one.
If it gets down to around $40, I may finally own one.
I see they are now listed for $50, which is a lot cheaper than the original price.
But still more than I am willing to pay for one.
If it gets down to around $40, I may finally own one.
Trevor Ylisaari
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: Metaluna Mutant in Styrene...
For Nostalgia reasons had to get me the Glow version of the mutant even though have the grey and the first version that pink color.
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
-
- Registered Seller
- Duke of Dry Brush
- Posts: 4650
- Joined: December 19th, 2003, 6:33 pm
- Location: The Rockies west of Colorado Springs
Re: Metaluna Mutant in Styrene...
Bumping this almost two years later, now that the Monsters of the Movies Godzilla is on the market. Looks like the Mutant got as low as $50 and more recent sales are back up to $70. The price for Godzilla is now $135 shipped in the States.