M-Arts Anguirus 55 SD Resin Kit!

Focused on all the big critters. Dinosaurs and KAIJU!
With added discussion of creating dioramas, shadowboxes, vignettes and bases

Moderators: tay666, Moderators

Post Reply
Message
Author
User avatar
Jon LeGrand
Duke of Dry Brush
Posts: 4154
Joined: July 22nd, 2008, 2:01 am
Location: Omaha, Nebraska

M-Arts Anguirus 55 SD Resin Kit!

#1 Post by Jon LeGrand »

Another great kit by M-Arts, sculpted by Akira Ibaraki! Super Deformed Anguirus 55!
Here is a video:
https://www.youtube.com/watch?v=7qtn0oln65A
Here are some photos. Very clean, solid, heavy kit, about 9.5 inches long, 5.5 inches high.

Image

Image

Image

Image

Image
ALL YOUR KAIJU MODEL KITS ARE BELONG TO US!!
Thanks, Jon LeGrand
WStulack
Seam Filler
Posts: 226
Joined: July 24th, 2013, 10:39 pm
Location: New Jersey

Re: M-Arts Anguirus 55 SD Resin Kit!

#2 Post by WStulack »

Great job as always Jon. All those spikes must have taken quite a bit of time.
I really like how you did the water and the sand, gradually making the sand from dry to wet as it gets closer to the water.
William Stulack
User avatar
Jon LeGrand
Duke of Dry Brush
Posts: 4154
Joined: July 22nd, 2008, 2:01 am
Location: Omaha, Nebraska

Re: M-Arts Anguirus 55 SD Resin Kit!

#3 Post by Jon LeGrand »

WStulack wrote:Great job as always Jon. All those spikes must have taken quite a bit of time.
I really like how you did the water and the sand, gradually making the sand from dry to wet as it gets closer to the water.
Thanks William!
ALL YOUR KAIJU MODEL KITS ARE BELONG TO US!!
Thanks, Jon LeGrand
User avatar
tay666
Site Admin
Posts: 19123
Joined: December 8th, 2003, 11:20 am
Location: Conneaut Ohio
Contact:

Re: M-Arts Anguirus 55 SD Resin Kit!

#4 Post by tay666 »

Great looking kit.
Really like the water, a lot.

Shows how much I pay attention, that gap under the shell, behind his head was bugging me. I thought it was a bit of an error from the sculpt. That is, until I took a quick look at some images of anguirus online, and see that is exactly how the suit is as well. :)
Trevor Ylisaari

Check out My Prehistoric Scenes site and forum

"Nothing like a trail of blood
To find your way back home."

WANTED - Bat Rider - produced by Wraiths
User avatar
Jon LeGrand
Duke of Dry Brush
Posts: 4154
Joined: July 22nd, 2008, 2:01 am
Location: Omaha, Nebraska

Re: M-Arts Anguirus 55 SD Resin Kit!

#5 Post by Jon LeGrand »

tay666 wrote:Great looking kit.
Really like the water, a lot.

Shows how much I pay attention, that gap under the shell, behind his head was bugging me. I thought it was a bit of an error from the sculpt. That is, until I took a quick look at some images of anguirus online, and see that is exactly how the suit is as well. :)
Thanks! I saw this kit on Yahoo Japan the other day if you want one.
ALL YOUR KAIJU MODEL KITS ARE BELONG TO US!!
Thanks, Jon LeGrand
User avatar
tay666
Site Admin
Posts: 19123
Joined: December 8th, 2003, 11:20 am
Location: Conneaut Ohio
Contact:

Re: M-Arts Anguirus 55 SD Resin Kit!

#6 Post by tay666 »

Thanks for the heads-up but I am kit broke for the time being.
All my finances are for bills and the holidays :(

I do have 1 anguirus kit in my stash, the West Kenji vinyl kit.
I just have to find it.
Most of my kits are still packed away from our move last year.
So far, I have only located and unpacked these
Image
Trevor Ylisaari

Check out My Prehistoric Scenes site and forum

"Nothing like a trail of blood
To find your way back home."

WANTED - Bat Rider - produced by Wraiths
User avatar
Jon LeGrand
Duke of Dry Brush
Posts: 4154
Joined: July 22nd, 2008, 2:01 am
Location: Omaha, Nebraska

Re: M-Arts Anguirus 55 SD Resin Kit!

#7 Post by Jon LeGrand »

tay666 wrote:Thanks for the heads-up but I am kit broke for the time being.
All my finances are for bills and the holidays :(

I do have 1 anguirus kit in my stash, the West Kenji vinyl kit.
I just have to find it.
Most of my kits are still packed away from our move last year.
So far, I have only located and unpacked these
Image
Lets see some build ups! :)
ALL YOUR KAIJU MODEL KITS ARE BELONG TO US!!
Thanks, Jon LeGrand
User avatar
tay666
Site Admin
Posts: 19123
Joined: December 8th, 2003, 11:20 am
Location: Conneaut Ohio
Contact:

Re: M-Arts Anguirus 55 SD Resin Kit!

#8 Post by tay666 »

Those are going to be even longer. Build-ups are packed as well, and I still have to finish (actually start) the work on my display room. Eventually, though, I will have an entire room to display my build ups.
Trevor Ylisaari

Check out My Prehistoric Scenes site and forum

"Nothing like a trail of blood
To find your way back home."

WANTED - Bat Rider - produced by Wraiths
User avatar
Jon LeGrand
Duke of Dry Brush
Posts: 4154
Joined: July 22nd, 2008, 2:01 am
Location: Omaha, Nebraska

Re: M-Arts Anguirus 55 SD Resin Kit!

#9 Post by Jon LeGrand »

tay666 wrote:Those are going to be even longer. Build-ups are packed as well, and I still have to finish (actually start) the work on my display room. Eventually, though, I will have an entire room to display my build ups.
Nice! I have one full room of general Kaiju, one side of a room for Kong, dinosaurs and related stuff, and recently a dresser in the guest room was topped with my 3 Ultraman pieces I have not sold. :)
ALL YOUR KAIJU MODEL KITS ARE BELONG TO US!!
Thanks, Jon LeGrand
User avatar
tay666
Site Admin
Posts: 19123
Joined: December 8th, 2003, 11:20 am
Location: Conneaut Ohio
Contact:

Re: M-Arts Anguirus 55 SD Resin Kit!

#10 Post by tay666 »

I hope one room will be enough for my needs.
I don't go for the big stuff. First of all, it costs a lot more :)
Second I just don't feel drawn to it yet. (though I do have a couple of the Polar Lights kits to build yet)

Also, my output it abysmal. My 'good' years so far have been about 10 kits a year. Though I am hoping once I finally have my dedicated work space set up and going, that will increase and I can start to make a dent in my kit stash. (more time building, and less time shopping)
Trevor Ylisaari

Check out My Prehistoric Scenes site and forum

"Nothing like a trail of blood
To find your way back home."

WANTED - Bat Rider - produced by Wraiths
User avatar
Jon LeGrand
Duke of Dry Brush
Posts: 4154
Joined: July 22nd, 2008, 2:01 am
Location: Omaha, Nebraska

Re: M-Arts Anguirus 55 SD Resin Kit!

#11 Post by Jon LeGrand »

tay666 wrote:I hope one room will be enough for my needs.
I don't go for the big stuff. First of all, it costs a lot more :)
Second I just don't feel drawn to it yet. (though I do have a couple of the Polar Lights kits to build yet)

Also, my output it abysmal. My 'good' years so far have been about 10 kits a year. Though I am hoping once I finally have my dedicated work space set up and going, that will increase and I can start to make a dent in my kit stash. (more time building, and less time shopping)
Good luck! I love building, I cant go a day without doing something with models or I get withdrawal symptoms ^^
ALL YOUR KAIJU MODEL KITS ARE BELONG TO US!!
Thanks, Jon LeGrand
Post Reply