Julie Walker - RotLD Part 3
Posted: November 6th, 2025, 2:39 pm
Picked up this great STL of Return of the Living Dead Part 3's Julie from Diklichart during a recent sale. Fantastic amount of detail although I did do a few small tweaks. I thought the fishnets were going to be really tough, but they are so crisply modelled/printed all it took were some very light drybrushing passes of black over the fleshtone to get the effect you see.
The glass shards were part of the original mesh - I removed these after printing and replaced them with new shards cut from clear acetate sheet - looks much more realistic. Also the finger wires were replaced with fusewire - I'd already broken 2 just whilst cleaning the prints.
The base was a solid one piece with embossed nameplate and Trioxin label - I removed both of these from the mesh with Blender, and also hollowed it out and cut out the window part. I then sculpted a rough & ready 'occupant' around a printed skull and added him inside. He's a bit hard to see through all the grime but you get the idea. Finally I cut a stencil for the Trioxin text on my vinyl cutter and sprayed the lettering back on.
The glass shards were part of the original mesh - I removed these after printing and replaced them with new shards cut from clear acetate sheet - looks much more realistic. Also the finger wires were replaced with fusewire - I'd already broken 2 just whilst cleaning the prints.
The base was a solid one piece with embossed nameplate and Trioxin label - I removed both of these from the mesh with Blender, and also hollowed it out and cut out the window part. I then sculpted a rough & ready 'occupant' around a printed skull and added him inside. He's a bit hard to see through all the grime but you get the idea. Finally I cut a stencil for the Trioxin text on my vinyl cutter and sprayed the lettering back on.
