What's new in the Gallery?
Check This thread
Check This thread
Kitbash:Demon SharkHuntr, Finished 2024-01-01
Moderator: Moderators
Kitbash:Demon SharkHuntr, Finished 2024-01-01
2024-01-01; new pics page 3; finished repaint
2023-12-27; new pics page 3; reworking the lava
2023-12-18; new pics,page 3; started detailing the lava
2023-12-17; new pics page 3; reduced size of feet, modified paint scheme, created lava base
2022-08-15; new pics page 2; modified chest, finished painting.
2022-08-12; new pics page 2; continuing painting
2022-08-08; new pics page 2; started painting
2022-08-07; new pics page 2; cleaning up the details
2022-08-06; new pics page 2; refining head , adding spikes down back and tail
2022-08-05; new pics page 2; adding details to top of head, adding spikes to tail, refining biceps, dreads
2022-08-03; new pics page 1; continuing to work dreads, detailing lower leg segments
2022-08-01; new pics page 1; attached tail, reduced right shoulder and wrists, working dreads
2022-07-31; new pics page 1; replaced back spikes; detailing abs, chest, claws, and dreads
2022-07-29; new pics page 1; working the tail and detailing feet
2022-07-28; new pics page 1; reworking back to add spikes that match tail spikes from draco kit
2022-07-27; new pics page 1; detailing back, under neck, chest ; adding leg segment and feet
2022-07-26; new pics page 1; beefed up backside, detailing back dreads and ridges, slimmed down neck
2022-07-23; new pics page 1; started detailing modified areas of arms and legs
2022-07-09; new pics page 1; attached legs
2022-07-08; new pics page 1; attached lower torso from shark hunter kit
2022-07-07; new pics page 1; beefed up arms, roughed in attaching arms to torso
Kitbash of Sandy Collora Shark Hunter and MageCraft Lord of the Print Abishai Demon.
MageCraft team has been printing me some large size versions of their creatures.
First attempt at printing 15 inch tall Abishae Demon did not work, but I bought the mis-print torso for bashing.
Utilizing legs and arms from shark hunter with demon torso.
Will have to scratch sculpt feet/claws as shark hunter kit has feet grafted into rock base.
Will have to beef up arms and legs, and reposition legs for more aggressive pose.
Will add a tail from some other kit, not sure which one yet.
Starting with demon torso and arms and legs from shark hunter :
Here are what kits look like if built straight out of the box:
Started by beefing up biceps , and roughed in attaching to torso. Still have to detail.
Cutting out webbing between fingers.
Cut and trimmed down the lower hip portion to make it easier to deal with upper torso.
Also plan to change angle of lower hips , so had to cut it off anyway.
2023-12-27; new pics page 3; reworking the lava
2023-12-18; new pics,page 3; started detailing the lava
2023-12-17; new pics page 3; reduced size of feet, modified paint scheme, created lava base
2022-08-15; new pics page 2; modified chest, finished painting.
2022-08-12; new pics page 2; continuing painting
2022-08-08; new pics page 2; started painting
2022-08-07; new pics page 2; cleaning up the details
2022-08-06; new pics page 2; refining head , adding spikes down back and tail
2022-08-05; new pics page 2; adding details to top of head, adding spikes to tail, refining biceps, dreads
2022-08-03; new pics page 1; continuing to work dreads, detailing lower leg segments
2022-08-01; new pics page 1; attached tail, reduced right shoulder and wrists, working dreads
2022-07-31; new pics page 1; replaced back spikes; detailing abs, chest, claws, and dreads
2022-07-29; new pics page 1; working the tail and detailing feet
2022-07-28; new pics page 1; reworking back to add spikes that match tail spikes from draco kit
2022-07-27; new pics page 1; detailing back, under neck, chest ; adding leg segment and feet
2022-07-26; new pics page 1; beefed up backside, detailing back dreads and ridges, slimmed down neck
2022-07-23; new pics page 1; started detailing modified areas of arms and legs
2022-07-09; new pics page 1; attached legs
2022-07-08; new pics page 1; attached lower torso from shark hunter kit
2022-07-07; new pics page 1; beefed up arms, roughed in attaching arms to torso
Kitbash of Sandy Collora Shark Hunter and MageCraft Lord of the Print Abishai Demon.
MageCraft team has been printing me some large size versions of their creatures.
First attempt at printing 15 inch tall Abishae Demon did not work, but I bought the mis-print torso for bashing.
Utilizing legs and arms from shark hunter with demon torso.
Will have to scratch sculpt feet/claws as shark hunter kit has feet grafted into rock base.
Will have to beef up arms and legs, and reposition legs for more aggressive pose.
Will add a tail from some other kit, not sure which one yet.
Starting with demon torso and arms and legs from shark hunter :
Here are what kits look like if built straight out of the box:
Started by beefing up biceps , and roughed in attaching to torso. Still have to detail.
Cutting out webbing between fingers.
Cut and trimmed down the lower hip portion to make it easier to deal with upper torso.
Also plan to change angle of lower hips , so had to cut it off anyway.
Last edited by barad_dur on January 1st, 2024, 10:36 pm, edited 21 times in total.
- tay666
- Site Admin
- Resin Slayer
- Posts: 17441
- Joined: December 8th, 2003, 11:20 am
- Location: Conneaut Ohio
- Contact:
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-07-0
You really like your kit-bashes.
Trevor Ylisaari
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
- LOBOREX
- Bishop of Build Ups
- Posts: 3980
- Joined: October 15th, 2004, 5:04 pm
- Location: DEEPEST, DARKEST, WOODS OF NEW YORK.
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-07-0
Very cool so far.
Helena is here at hand;
And the youth, mistook by me,
Pleading for a lover's fee.
Shall we their fond pageant see?
Lord, what fools these mortals be! -Puck
And the youth, mistook by me,
Pleading for a lover's fee.
Shall we their fond pageant see?
Lord, what fools these mortals be! -Puck
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-07-0
Hah, that is very true Trevor.
What I enjoy most about this hobby is creating unique one-of-a-kind creatures.
Thank you LOBOREX. I sincerely appreciate your frequent positive feedback!
What I enjoy most about this hobby is creating unique one-of-a-kind creatures.
Thank you LOBOREX. I sincerely appreciate your frequent positive feedback!
- tay666
- Site Admin
- Resin Slayer
- Posts: 17441
- Joined: December 8th, 2003, 11:20 am
- Location: Conneaut Ohio
- Contact:
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-07-2
I like the spikes, and those feet are looking good.
Trevor Ylisaari
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-07-2
Replaced my scratch sculpted back spikes with the back spikes from draco model kit
Reworked abs
Extended back dreads, put the front cutoff dreads back on; still need to blend dreads in better
Continued to detail scratch sculpted feet and bottom leg segment
Need to attach tail, do a little more detailing, and then start painting
Reworked abs
Extended back dreads, put the front cutoff dreads back on; still need to blend dreads in better
Continued to detail scratch sculpted feet and bottom leg segment
Need to attach tail, do a little more detailing, and then start painting
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-07-3
Continuing to work dreads, it is very difficult to get them to taper off evenly
Refining other spikes and details
I am pretty happy with how the modified legs, feet, and tail came out,
Tail is ready to be permanently attached after all the body details are completed.
Thanks for looking, improvement suggestions and comments are welcome .
Refining other spikes and details
I am pretty happy with how the modified legs, feet, and tail came out,
Tail is ready to be permanently attached after all the body details are completed.
Thanks for looking, improvement suggestions and comments are welcome .
- LOBOREX
- Bishop of Build Ups
- Posts: 3980
- Joined: October 15th, 2004, 5:04 pm
- Location: DEEPEST, DARKEST, WOODS OF NEW YORK.
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-08-0
Really coming together now.
Helena is here at hand;
And the youth, mistook by me,
Pleading for a lover's fee.
Shall we their fond pageant see?
Lord, what fools these mortals be! -Puck
And the youth, mistook by me,
Pleading for a lover's fee.
Shall we their fond pageant see?
Lord, what fools these mortals be! -Puck
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-08-0
Thanks! Yeah, Getting there , but still some work to do …
Re: Kitbash: Demon Shark Hunter Creature, new pics 2022-08-0
Reworking dreads (I have developed an even greater respect for the sculptors of predator kits!)
Adding details to legs
Right side before (4 dreads)
Right side now, (3 dreads)
Left side before, front dread angled out front too far
Left side now, made front dread hang more vertically ; cleaned up all dreads
Continuing to Refine back dreads
Adding detail to the lower leg segments that I sculpted to match upper shark hunter kit legs
Adding details to legs
Right side before (4 dreads)
Right side now, (3 dreads)
Left side before, front dread angled out front too far
Left side now, made front dread hang more vertically ; cleaned up all dreads
Continuing to Refine back dreads
Adding detail to the lower leg segments that I sculpted to match upper shark hunter kit legs