What's new in the Gallery?
Check This thread
Check This thread
MOM Godzilla in Plastic!
Moderators: tay666, Moderators
-
- Bishop of Build Ups
- Posts: 3101
- Joined: November 28th, 2007, 8:24 pm
- Location: St Charles, MO
MOM Godzilla in Plastic!
Looks like the pattern for the MOM Godzilla has been made into a styrene kit just like the Metaluna Mutant. 2 are on eBay right now selling as a "monster" along with either the Mutant repro long box or with box and a Mutant kit. Priced at $150 & $195.
Look up the Metaluna Mutant to see the listings - won't come up under Godzilla.
Look up the Metaluna Mutant to see the listings - won't come up under Godzilla.
Steve Cooke
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: MOM Godzilla in Plastic!
Just bought one from Phil on his ebay account.Hope he does the Phantom of the Opera Christine Aurora never released that he has in this video https://www.youtube.com/watch?v=bFIZKMjcRu0
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
-
- Glue Sniffer
- Posts: 105
- Joined: February 21st, 2019, 3:19 am
Re: MOM Godzilla in Plastic!
There could be some legal repercussions using the word "Godzilla" as I would guess that this is an "unlicensed" item AND it's new rather than vintage...Scooke123 wrote:Looks like the pattern for the MOM Godzilla has been made into a styrene kit just like the Metaluna Mutant. 2 are on eBay right now selling as a "monster" along with either the Mutant repro long box or with box and a Mutant kit. Priced at $150 & $195.
Look up the Metaluna Mutant to see the listings - won't come up under Godzilla.
- tay666
- Site Admin
- Prince of Plastic
- Posts: 17534
- Joined: December 8th, 2003, 11:20 am
- Location: Conneaut Ohio
- Contact:
Re: MOM Godzilla in Plastic!
Very interesting.
I count 17 completed listings for this item, and no current auctions.
For anyone interested in seeing it, here is one of the completed listings
https://www.ebay.com/itm/AURORA-PINK-MO ... 7675.l2557
And here is a look at his ebay listings
https://www.ebay.com/sch/mysailday/m.html
I count 17 completed listings for this item, and no current auctions.
For anyone interested in seeing it, here is one of the completed listings
https://www.ebay.com/itm/AURORA-PINK-MO ... 7675.l2557
And here is a look at his ebay listings
https://www.ebay.com/sch/mysailday/m.html
Trevor Ylisaari
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
Check out My Prehistoric Scenes site and forum
"Nothing like a trail of blood
To find your way back home."
WANTED - Bat Rider - produced by Wraiths
- Anton Phibes
- Seam Filler
- Posts: 300
- Joined: July 4th, 2013, 2:27 am
- Location: Ohio
Re: MOM Godzilla in Plastic!
That's sweet, but out of my price range til at least mid November. May take the plunge then. We shall see.
-
- Brush Jockey
- Posts: 33
- Joined: November 19th, 2007, 3:16 am
- Location: Seattle area
Re: MOM Godzilla in Plastic!
Did the original proto not have the usual MOM base? The Metaluna Mutant has it but Godzilla doesn't?
- Anton Phibes
- Seam Filler
- Posts: 300
- Joined: July 4th, 2013, 2:27 am
- Location: Ohio
Re: MOM Godzilla in Plastic!
Dana Campion wrote:Did the original proto not have the usual MOM base? The Metaluna Mutant has it but Godzilla doesn't?
Godzilla doesn't have it. Metaluna Mutant didn't either as I recall. It was added when the kits made it into styrene. Anyone with more information can feel free to correct me, as my old gray matter ain't what it used to be. The Christina prototype out there doesn't have it either as I recall. Not sure about the Fay Wray/Bride of Kong prototype. I know the resin one had a base, but not sure if that was an add on like Mutant's was. Hope this helps.
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: MOM Godzilla in Plastic!
You stand corrected.The Fay Wray is owned by Melmento Pete.I should be getting my two Godzillas tomorrow so going to match the base up to reissue rodan base that have laying around.If it fits will start smoothing it out.Anton Phibes wrote:Dana Campion wrote:Did the original proto not have the usual MOM base? The Metaluna Mutant has it but Godzilla doesn't?
Godzilla doesn't have it. Metaluna Mutant didn't either as I recall. It was added when the kits made it into styrene. Anyone with more information can feel free to correct me, as my old gray matter ain't what it used to be. The Christina prototype out there doesn't have it either as I recall. Not sure about the Fay Wray/Bride of Kong prototype. I know the resin one had a base, but not sure if that was an add on like Mutant's was. Hope this helps.
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- Anton Phibes
- Seam Filler
- Posts: 300
- Joined: July 4th, 2013, 2:27 am
- Location: Ohio
Re: MOM Godzilla in Plastic!
I think you mis-understood me. I didn't state the same individual owned all those prototypes. I honestly don't know any of the individuals in question beyond on screen handles. I have bought "Sceners" kits from Molemento, but that's all I know of the name. What I was addressing was the bases. I know Big Z. didn't get that far. I don't think Metaluna did. I wasn't sure on that one though. I know Christine doesn't have one, just a stone block from what I read in a book long ago. I have zippo knowledge of Fay. I had a resin one at one point in time, and wound up selling her off. That one had a base....but I am also uncertain if the proto had a base or if it was an after market add on, like you are speaking of doing for your Zilla. So, while I am not opposed to being corrected, I think you misunderstood me. But since I've got you: did Mutant actually have a base designed by Aurora that made it into proto type stage? Howabout Bride of Kong? Or were they after market for offerings in limited numbers? Thanks.WOLFMAN66 wrote:You stand corrected.The Fay Wray is owned by Melmento Pete.I should be getting my two Godzillas tomorrow so going to match the base up to reissue rodan base that have laying around.If it fits will start smoothing it out.Anton Phibes wrote:Dana Campion wrote:Did the original proto not have the usual MOM base? The Metaluna Mutant has it but Godzilla doesn't?
Godzilla doesn't have it. Metaluna Mutant didn't either as I recall. It was added when the kits made it into styrene. Anyone with more information can feel free to correct me, as my old gray matter ain't what it used to be. The Christina prototype out there doesn't have it either as I recall. Not sure about the Fay Wray/Bride of Kong prototype. I know the resin one had a base, but not sure if that was an add on like Mutant's was. Hope this helps.
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: MOM Godzilla in Plastic!
Godzilla doesn't have it. Metaluna Mutant didn't either as I recall. It was added when the kits made it into styrene. Anyone with more information can feel free to correct me, as my old gray matter ain't what it used to be. The Christina prototype out there doesn't have it either as I recall. Not sure about the Fay Wray/Bride of Kong prototype. I know the resin one had a base, but not sure if that was an add on like Mutant's was. Hope this helps.[/quote]You stand corrected.The Fay Wray is owned by Melmento Pete.I should be getting my two Godzillas tomorrow so going to match the base up to reissue rodan base that have laying around.If it fits will start smoothing it out.[/quote]
I think you mis-understood me. I didn't state the same individual owned all those prototypes. I honestly don't know any of the individuals in question beyond on screen handles. I have bought "Sceners" kits from Molemento, but that's all I know of the name. What I was addressing was the bases. I know Big Z. didn't get that far. I don't think Metaluna did. I wasn't sure on that one though. I know Christine doesn't have one, just a stone block from what I read in a book long ago. I have zippo knowledge of Fay. I had a resin one at one point in time, and wound up selling her off. That one had a base....but I am also uncertain if the proto had a base or if it was an after market add on, like you are speaking of doing for your Zilla. So, while I am not opposed to being corrected, I think you misunderstood me. But since I've got you: did Mutant actually have a base designed by Aurora that made it into proto type stage? Howabout Bride of Kong? Or were they after market for offerings limited numbers? Thanks.[/quote]Let me clarify my first statement as was never correcting you at all .You were correct as for later on with the Mutant a base appeared in its polystyrene form.But when first issued in resin to the Aurora 12 on Aurora yahoo group no base at all not even a aftermarket one(You can see mine on Bucs website under Aurora prototype.The Bride of Kong never had a base.That was done by Pete or Molemento Pete.Now the second part just wanted to point out who made what in case someone was looking for maybe the bride of Kong which is oop and was limited to only 50 castings.
I think you mis-understood me. I didn't state the same individual owned all those prototypes. I honestly don't know any of the individuals in question beyond on screen handles. I have bought "Sceners" kits from Molemento, but that's all I know of the name. What I was addressing was the bases. I know Big Z. didn't get that far. I don't think Metaluna did. I wasn't sure on that one though. I know Christine doesn't have one, just a stone block from what I read in a book long ago. I have zippo knowledge of Fay. I had a resin one at one point in time, and wound up selling her off. That one had a base....but I am also uncertain if the proto had a base or if it was an after market add on, like you are speaking of doing for your Zilla. So, while I am not opposed to being corrected, I think you misunderstood me. But since I've got you: did Mutant actually have a base designed by Aurora that made it into proto type stage? Howabout Bride of Kong? Or were they after market for offerings limited numbers? Thanks.[/quote]Let me clarify my first statement as was never correcting you at all .You were correct as for later on with the Mutant a base appeared in its polystyrene form.But when first issued in resin to the Aurora 12 on Aurora yahoo group no base at all not even a aftermarket one(You can see mine on Bucs website under Aurora prototype.The Bride of Kong never had a base.That was done by Pete or Molemento Pete.Now the second part just wanted to point out who made what in case someone was looking for maybe the bride of Kong which is oop and was limited to only 50 castings.
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- Anton Phibes
- Seam Filler
- Posts: 300
- Joined: July 4th, 2013, 2:27 am
- Location: Ohio
Re: MOM Godzilla in Plastic!
Ah, merci. Now we know. Make sure to let everyone (or me at least,lol) see what comes of using a Rodan MOM base for your Zilla. If that works, Imma have to do it too. Although Ghidrah might be easier. Less to get rid of on his square than Rodan's.
- Buc Wheat
- Bishop of Build Ups
- Posts: 3505
- Joined: December 21st, 2003, 4:26 pm
- Location: Windham, CT
- Contact:
Re: MOM Godzilla in Plastic!
Unconfuse me when you all are talking MM bases? I know when the
orig prototype came up on eBay (the one Phil bought), it had a base...
So where am I not understanding you guys?
(You're not talking about the clapper board are you?)
orig prototype came up on eBay (the one Phil bought), it had a base...
So where am I not understanding you guys?
(You're not talking about the clapper board are you?)
- Anton Phibes
- Seam Filler
- Posts: 300
- Joined: July 4th, 2013, 2:27 am
- Location: Ohio
Re: MOM Godzilla in Plastic!
Buc Wheat wrote:Unconfuse me when you all are talking MM bases? I know when the
orig prototype came up on eBay (the one Phil bought), it had a base...
So where am I not understanding you guys?
(You're not talking about the clapper board are you?)
Lol, you can tell we are all confused. What Wolfman and I were discussing was the square base with clapper board. The prototypes were never shown with any, yet Mutant and Bride of Kong had one when the limited editions for them saw the lighh of day. hence they were added for such and not in initial production at Aurora. I am probably not making sense here either,lol. Me not tech savvy.
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: MOM Godzilla in Plastic!
Buc yes the Clapper board.I just couldnt think what the hell ya call it.LOLBuc Wheat wrote:Unconfuse me when you all are talking MM bases? I know when the
orig prototype came up on eBay (the one Phil bought), it had a base...
So where am I not understanding you guys?
(You're not talking about the clapper board are you?)
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: MOM Godzilla in Plastic!
I posted bunch of pics of two got in today along side the regular 1/8 version to show size comparison on my Aurora monster scenes facebook board.
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- Anton Phibes
- Seam Filler
- Posts: 300
- Joined: July 4th, 2013, 2:27 am
- Location: Ohio
Re: MOM Godzilla in Plastic!
Post them here, man! Post them here!
-
- Brush Jockey
- Posts: 33
- Joined: November 19th, 2007, 3:16 am
- Location: Seattle area
Re: MOM Godzilla in Plastic!
Using a Rodan or Ghidorah MOM base is a great idea. When my Godzilla arrives I'll have to see which one works best.
- WOLFMAN66
- Moderator
- Resin Slayer
- Posts: 15184
- Joined: February 20th, 2005, 10:18 pm
- Location: EnglishTown Raceway
Re: MOM Godzilla in Plastic!
Godzillas base is bigger in length and width.Anton Phibes wrote:Post them here, man! Post them here!
Travelers to unknown regions would be well-advised to take along the family dog. He could just save you from entering the wrong gate.
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
https://www.facebook.com/groups/Kaijumodelkit/
https://www.facebook.com/groups/MonarchModelGroup/
- Anton Phibes
- Seam Filler
- Posts: 300
- Joined: July 4th, 2013, 2:27 am
- Location: Ohio